PRODUCTS
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
AISI 4140 Steel 1.7225 42CrMo4 SCM440
<strong> AISI 4140 steel</strong> is a low alloy steel containing chromium, molybdenum, and manganese. It is widely used across numerous industries and is an excellent material choice due to its toughness, high fatigue strength, and abrasion and impact resistance. Not many grades can match the versatility and usefulness of 4140.
<strong>AISI 8620 Steel</strong> is suited for applications that require a combination of toughness and wear resistance. AISI 8620 steel material is used extensively by all industry sectors, for example, manufacturing the engine of the tractor and the small –and medium-sized vehicles.
5140 Steel Plate 1.7035 41Cr4 SCr440 Alloy Steel
<strong>AISI 5140 steel</strong>, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block.
AISI 4340 Steel 36CrNiMo4 1.6511 EN24 817M40 SNCM439
<strong>AISI 4340 steel</strong> is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. 4340 alloy steel is generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
<strong>EN 34CrNiMo6 Steel </strong>is an important alloy engineering steel grade as per BS EN 10083-3:2006. Usually we supply 34CrNiMo6 steel in Q+T condition or hot rolled condition.
Cr12 hot rolled steel round bars
<strong>Cr12 steel </strong>is a typical alloy Tool steel, Cr12 is a chinese Cold Work Alloy Tool Steel. Its Cold work Mechanical Properties is very nice. Cr12 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC.
Cr12MoV hot rolled steel round bars
<strong>Cr12MoV steel </strong>has high hardenability, and those with a cross-section of 300 to 400 mm or less can be completely quenched. It can maintain good hardness and wear resistance at 300 ～ 400℃, its toughness is higher than Cr12 steel, and its volume change is minimal during quenching. It can be used to manufacture various molds and tools with large cross-sections, complex shapes, and withstand large impact loads. For example, punching dies with complex shapes, inserts on complex dies, steel deep drawing dies, wire drawing dies, threaded wire plate, cold extrusion dies, cold cutting scissors, circular saws, standard tools, measuring tools, etc.
<strong>AISI 4140 Alloy Steel</strong> is a common chromium-molybdenum steel that usually used after quenched and tempered, with high intensity, high hardenability. The alloy 4140 plate also has high fatigue strength and good low-temperature impact toughness.
42CrMo hot rolled steel sheet/bar
<strong>42CrMo steel</strong>belongs to plastic mold steel in mold steel from the perspective of material classification. It has good mechanical properties and machinability, and is widely used. There are mainly two types of materials, plate and round bar. Plate is used for mold processing Production, round rods are used to machine parts directly, which has been recognized by the industry.
CONTACT US
Tel : +8615376894258
E-mail : manager3@wugangmetal.com
WhatApp : +8615376894258
Add : Qingdao City, China
GET A FREE QUOTE
Copyright : Wugang Steel (Qingdao) Co., Ltd.