Rebar-PRODUCT CENTER-Wugang Steel

PRODUCT CENTER

If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!

+8615376894258

Mobile

+8615376894258

manager3@wugangmetal.com

E-mail

HPB300/HRB335 Reinforcement Rebar

HPB300 grade: The yield strength of steel bars in this grade is 300MPa, with high plasticity and toughness, suitable for general structural reinforcement and stirrups. HRB335 grade: The yield strength of this grade of steel bars is 335MPa, with high strength and good ductility, suitable for general structural reinforcement and...

VIEW MORE +

ASTM A615 Concrete Rebar Grade 40

A615 grade 40 steel adds the most benefit when building materials must hold concrete in compression. Strength is one of the differentiators for these two rebar grades. The minimum tensile strength for A615 grade 40 steel is 70.05 ksi. It has a minimum yield strength of 40 ksi.

VIEW MORE +

HRB400/HRB400E Deformed Steel Rebar

HRB400 is a steel reinforcement material with high strength and good plasticity. HR stands for "hot rolling", which essentially refers to the heating and rolling process of steel bars in the production process. B represents that its yield strength is 400 megapascals (MPa) higher than that of ordinary carbon steel. HRB400 steel bars...

VIEW MORE +

HRB500/HRB500E Deformed Steel Rebar

HRB500 steel reinforcement refers to a commonly used steel material in concrete structures, which has certain strength and toughness, and can effectively enhance the bearing capacity and tensile performance of concrete. Steel reinforcement plays an important role in construction.

VIEW MORE +

B500A/B500B/B500C Rebar

B500A grade steel is usually used for steel mesh products while B500B grade steel is used for steel bars. B500C steel is rarely required, and it is always worthwhile for structural engineers to check whether B500B grade steel can be used instead of B500C, because B500C usually has a significant cost overhead.

VIEW MORE +

TMT Bars

TMT means Thermo Mechanical Treatment, which is a thermomechanical process; These TMT steel bars are generally used material in construction for enhanced protection against earthquake and another type of natural disasters. To ensure safety for your structure, TMT steel bars should be resistant to corrosion...

VIEW MORE +

ASTM A615 Reinforcement Bar Grade 75

ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.

VIEW MORE +

Deformed Rebar

Deformed bar, also known as rebar (short for reinforcing bar), is a steel bar or mesh of steel wires used as tension devices in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension. Deformed bar’s surface is often patterned to form a better bond with the concrete.

VIEW MORE +

< 1 2 >

Tel : +8615376894258
E-mail : manager3@wugangmetal.com
WhatApp : +8615376894258

Add : Qingdao City, China

WeChat

GET A FREE QUOTE

SAF Coolest v1.3 设置面板XPHSX-ZFAZ-DVZAE-ZDS

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用